Specification parameters of aluminum electrolytic capacitor (bolt 85 ℃ 5000h long life capacitor)

Specification parameters of fe50 series aluminum electrolytic capacitor (bolt 85 ℃ 5000h long life capacitor)
application area
Uninterruptible power supply
Frequency converter
Solar and wind power generation equipment
characteristic
All welded structure ensures reliable electrical contact.
High performance and high ripple resistance
RoHS compliant
structure
Charge discharge protection with polarity
Adopt aluminum shell and insulating jacket design
Electrode connection of bolt type terminal
Install with snap ring / clip or bolt
The bottom plate of the model with bolt assembly and D ≤ 76.9mm is not insulated, and the bottom of the model with diameter of 91.0mm is insulated.
Long life capacitor at 85 ℃ for 5000h
Introduction to specifications and features
Rated voltage VR: 350-450 V DC
Surge voltage vs: 1.10 * VR
Rated capacity Cr: 1000-18000 μ f
Capacitance Deviation: ± 20% (group M)
Leakage current ileak (25 ℃, 5minutes): 0.008 c * V [μ F] or 5mA (C = rated capacity [μ F], v = rated voltage [v])
Maximum loss tangent (25 ℃, 120Hz): 0.2

Ripple current capability
According to the ripple current resistance of the contact element, the following current limits shall not be exceeded:
Capacitor diameter D: 51.6mm ＜ IAC, max current: 45A
Capacitor diameter D: 64.3mm ＜ IAC, max current: 55A
Capacitor diameter D: 76.9mm ＜ IAC, max current: 80A
Capacitor diameter D: 91.0 mm ＜ IAC, max current: 100 a
Dimensional drawing and product weight

Fe52 is installed with bottom bolts, and the bottom plate of the model with D ≤ 76.9mm is not insulated, while the bottom plate of the model with diameter of 91.0mm is insulated.

Number of packages
Capacitor diameter d = 51.6 mm, 22 in a box
Capacitor diameter d = 64.3mm, 15 in a box
Capacitor diameter d = 76.9mm, 12 in a box
Capacitor diameter d = 91.0 mm, 8 in a box
parts
The following accessories are used to fix the aluminum electrolytic capacitor, but are not included in the delivery box.
For terminal: M5 (outer hexagon cross screw M5 × 10 (fas01) with spring and gasket) with maximum torque of 3.0nm
The maximum torque of M6 (outer hexagon cross screw with spring and gasket, M6 × 12 (fas02)) is 3.5Nm
For bottom screw installation: M12 (hexagon nut bm12) maximum torque 10nm
The size of anti reverse terminal is shown in the figure below:

Size of reverse terminal cover plate:

Technical parameters and order number of aluminum electrolytic capacitor